DLBRV-I spot repair vulcanizer mainly used to repair the small patches of conveyor belts & the belt core layers damaged caused by belt piercing. Namely, to repair the the spot, points defects.
During running of conveyor, due to reasons of heavy material, drop or equipment trouble may lead to spot-shape damage of conveyor belt, then we should repair it immediately. DLCBV-I spot belt repair vulcanizer is specially used to repair small size broken and spot-shape of conveyor belt, it suits for EP, Nylon, Canvas and steel cord belt.
The quality of the belt joint of the conveyor belt directly affects the service life, work efficiency and economic benefits of the conveyor belt. In particular, the current widening, ultra-long-distance, high-strength conveyor belt is more important, so the DLCBV type electric vulcanizer press is an ideal auxiliary equipment for the conveyor belt vulcanization joint.
Advantages of belt repair vulcanizer
1.Aluminum Alloy material structure, light weight machine body
2.Easy to install, machine structure is simple
3.Easy to operate, adopt automatic control box
4.Uniform heating, with the aluminum alloy heating plate
5.Uniform water pressure system, with aluminum alloy material water hydraulic plate
1. Heating plate size: 350*350 mm;
2. Max. Repair size: 250*250 mm;
3. Working pressure: 0.5--1.0 MPa;
4. Rated power: 2.0 KW;
5. Heating up time< 30 minutes;
6. Timer adjust range: 0-99 minutes;
7. Temperature adjust range: 0-200 ℃;
8. Voltage: 220-660V, 50/60HZ, 3 Phases;
9. Repair belt width: 650 mm--2200 mm.
C Clamp spot belt repair vulcanizer
Type of conveyor belt
Canvas, nylon and steel cord belt
Maximum size for belt repairing(mm)
Heating plate size(mm)
Vulcanizing temperature 145℃
220-660V, 50/60HZ, 3 Phases
Temperature difference of vulcanized heating plates
Warm up time(min)
1. The repairing machine should be kept in the store house under the conditions of 85 of relative humidity, and of no rain or snow.
2. During the operation or transportation, the equipment should be handled care.
3. If the interval of the operation is quite long, the insulation resistance of heating plates should be checked before operating the vulcanizer.
4. The working pressure should not be exceeded 0.8Mpa. It is necessary to pay attention to the working pressure required when filling with water to raise the pressure.
5. Ask the electrician to check and repair if there is anything wrong with the control panel.
6. If the product does have any problem of manufacturing quality in 12 months from purchasing, we will maintain for the user or displace the parts free of charge.