DLBRV-I c clamp rubber belt repair vulcanizer machine mainly used to repair the small patches of conveyor belts & the belt core layers damaged caused by belt piercing. Namely, to repair the the spot, points defects.
During running of conveyor, due to reasons of heavy material, drop or equipment trouble may lead to spot-shape damage of conveyor belt, then we should repair it immediately.
Rubber belt repair vulcanizer is specially used to repair small size broken and spot-shape of conveyor belt, it suits for EP, Nylon, Canvas and steel cord belt.
"C" type clamp rubber belt repair vulcanizer machine repair machine is for belt width 500~1600mm, heating plate size 350*350mm.
Features & Usage
"C" clamp rubber conveyor belt repair machine is made by high-strength aluminum alloy, light and easy to transport.
DLBRV-I featuring that: simple structure, light weight, easy operation, and it can use the Conveyor belt vulcanizer’s cross beam for the purpose of minimizing the equipment purchase costs, the operation method is same as the Conveyor belt vulcanizer.
We supply many kinds of type for different width of belt or different broken type.
1. Heating plate size: 350*350 mm;
2. Max. Repair size: 250*250 mm;
3. Working pressure: 0.5--1.0 MPa;
4. Rated power: 2.0 KW;
5. Heating up time< 30 minutes;
6. Timer adjust range: 0-99 minutes;
7. Temperature adjust range: 0-200 ℃;
8. Voltage: 220-660V, 50/60HZ, 3 Phases;
9. Repair belt width: 650 mm--2200 mm.
C clamp rubber conveyor belt repair machine
Type of conveyor belt
Canvas, nylon and steel cord belt
Maximum size for belt repairing(mm)
Heating plate size(mm)
Vulcanizing temperature 145℃
220-660V, 50/60HZ, 3 Phases
Temperature difference of vulcanized heating plates
Warm up time(min)
Installation & Usage
a. Carry the spot conveyor belt repair vulcanizer to the place where the belt need be repaired.
b. Please repair the broken place by covering with raw rubber. (See also the belt connection by vulcanization techniques in filling rubber part, or our serviceman displays the debugging of equipment.
c. Please put the down-plate, hydraulic pressure plate and down-heating plate under the broken belt place according to the structure sketch map.
d. Please put the up-heating plate, heat-insulation plate up-plate and down-plate, and keep them uniformity.
e. Please install lock shells by the same distance and tighten the screw bolts.
f. Please connect the power and electric control box with primary conducting wire, and separately connect up-heating plate and electric control box, down-heating plate and electric control box with the secondary conducting wire.
g. Please connect the water pump and hydraulic pressure plate with high-pressure tube, start the electric control box and fill water to the hydraulic pressure plate until the vulcanization pressure.