Suzhou Arphu Industrial Co.,Ltd
Conveyor Belt Repair Vulcanizer​DLBRV-I spot repair vulcanizer mainly used to repair the small patches of conveyor belts & the belt core layers damaged caused by belt piercing. Namely, to repair the the spot, points defects.

DLBRV-I spot repair vulcanizer mainly used to repair the small patches of conveyor belts & the belt core layers damaged caused by belt piercing. Namely, to repair the the spot, points defects.


During running of conveyor, due to reasons of heavy material, drop or equipment trouble may lead to spot-shape damage of conveyor belt, then we should repair it immediately. DLCBV-I spot belt repair vulcanizer is specially used to repair small size broken and spot-shape of conveyor belt, it suits for EP, Nylon, Canvas and steel cord belt.


Features & Usage

DLBRV-I spot repair vulcanizer mainly used to repair the small patches of conveyor belts & the belt core layers damaged caused by belt piercing. Namely, to repair the the spot, points defects.

DLBRV-I featuring that: simple structure, light weight, easy operation, and it can use the Conveyor belt vulcanizer’s cross beam for the purpose of minimizing the equipment purchase costs, the operation method is same as the Conveyor belt vulcanizer.


Technical parameter

1. Heating plate size: 350*350 mm;

2. Max. Repair size: 250*250 mm;

3. Working pressure: 0.5--1.0 MPa;

4. Rated power: 2.0 KW;

5. Heating up time< 30 minutes;

6. Timer adjust range: 0-99 minutes;

7. Temperature adjust range: 0-200 ℃;

8. Voltage: 220-660V, 50/60HZ, 3 Phases;

9. Repair belt width: 650 mm--2200 mm.


Model

DLBRV-I

Product name

C Clamp spot belt repair vulcanizer

Type of conveyor belt

Canvas, nylon and steel cord belt

Width range(mm)

650—1400

Maximum size for belt repairing(mm)

250×250

Heating plate size(mm)

350×350

Vulcanizing temperature 145℃

Adjustable 0—200℃

Total power(Kw)

2

Voltage(V)

220-660V, 50/60HZ, 3 Phases

Temperature difference of vulcanized heating plates

±3

Vulcanization pressure(Mpa)

0.5

Warm up time(min)

<30


Installation & Usage

a. Carry the spot conveyor belt repair vulcanizer to the place where the belt need be repaired.

b. Please repair the broken place by covering with raw rubber. (See also the belt connection by vulcanization techniques in filling rubber part, or our serviceman displays the debugging of equipment.  

c. Please put the down-plate, hydraulic pressure plate and down-heating plate under the broken belt place according to the structure sketch map;

d. Please put the up-heating plate, heat-insulation plate up-plate and down-plate, and keep them uniformity.

e. Please install lock shells by the same distance and tighten the screw bolts.

f. Please connect the power and electric control box with primary conducting wire, and separately connect up-heating plate and electric control box, down-heating plate and electric control box with the secondary conducting wire.

g. Please connect the water pump and hydraulic pressure plate with high-pressure tube, start the electric control box and fill water to the hydraulic pressure plate until the vulcanization pressure.


Related Products
Hot Tags: conveyor belt repair vulcanizer, China, suppliers, manufacturers, factory, high quality, for sale