With the advantage of small size, simple operation and reliable repair quality, the DLBRV-III Longitudinal tear belt repair machine becomes a preferable and necessary tool for belt hot vulcanization repair.
DLBRV-III Longitudinal tear rubber belt repair machine is composed of screw devices(including top & bottom platen), water platen, upper &lower heating platen and frame, with the features of simple structure, easy to operate, won’t affect by the bias angle of repairing work surface, stable pressure, which is widely used for on-site belt repair occasions.
During running of conveyor, due to the reasons of raw material mixing with impurities or conveyor malfunction, conveyor belt will be broken in long distance by longitudinal tear. With the DLBRV-III Longitudinal Tear Repair Vulcanizer Machine, longitudinal tear of conveyor belt can be repaired rapidly & effectively. The repair vulcanizer suits for EP, Nylon, Canvas and steel cord belt. In additional, our factory can produce the special repairing machines according to user’s needs.
1. Heating plate size: 350*1000 mm
2. Max. Repair size: 250*900 mm
3. Working pressure: 0.5--0.8 MPa
4. Rated power: 5.2 KW
5. Heating up time< 30 minutes
6. Timer adjust range: 0-99 minutes
7. Temperature adjust range: 0-200℃
8. Voltage: 220-660V, 50/60HZ, 3 Phases
9. Repair belt width: 650 mm--2600 mm
longitudinal tear repair vulcanizer machine
Type of conveyor belt
Canvas, nylon and steel cord belt
Maximum size for belt repairing(mm)
Heating plate size(mm)
Vulcanizing temperature 145℃
220-660V, 50/60HZ, 3 Phases
Temperature difference of vulcanized heating plates
Warm up time(min)