During running of conveyor, due to reasons of heavy material, drop or equipment trouble may lead to spot-shape damage of conveyor belt, then we should repair it immediately. DLCBV-I spot belt repair vulcanizer is specially used to repair small size broken and spot-shape of conveyor belt, it suits for EP, Nylon, Canvas and steel cord belt.
DLBRV-I cross beam spot repair vulcanizer mainly used to repair the small patches of conveyor belts & the belt core layers damaged caused by belt piercing. Namely, to repair the the spot, points defects, DLBRV-I featuring that: simple structure, light weight, easy operation, and it can use the Conveyor belt vulcanizer’s cross beam for the purpose of minimizing the equipment purchase costs, the operation methods is same as the Conveyor belt vulcanizer.
1. Heating plate size: 350*350 mm;
2. Max. Repair size: 250*250 mm;
3. Working pressure: 0.5--1.0 MPa;
4. Rated power: 2.0 KW;
5. Heating up time< 30 minutes;
6. Timer adjust range: 0-99 minutes;
7. Temperature adjust range: 0-200 ℃;
8. Voltage: 220-660V, 50/60HZ, 3 Phases;
9. Repair belt width: 650 mm--2200 mm.
If belt width>1400 mm, please choose Cross Beam Spot Repair Vulcanizer.
Cross beam spot belt repair vulcanizer
Type of conveyor belt
Canvas, nylon and steel cord belt
Maximum size for belt repairing(mm)
Heating plate size(mm)
Vulcanizing temperature 145℃
220-660V, 50/60HZ, 3 Phases
Temperature difference of vulcanized heating plates
Warm up time(min)