Conveyor belt repair vulcanizer manufacturer, DLBRV-I type conveyor belt repair vulcanizer, spot belt repair vulcanizer machine, best-selling China rubber & steel-cord repair vulcanizers for conveyor belt small patches.
During running of conveyor, due to reasons of heavy material, drop or equipment trouble may lead to spot-shape damage of conveyor belt, then we should repair it immediately. DLCBV-I spot belt repair vulcanizer is specially used to repair small size broken and spot-shape of conveyor belt, it suits for EP, Nylon, Canvas and steel cord belt.
Aluminum Alloy material structure, light weight machine body
1. Easy to install, machine structure is simple
2. Easy to operate, adopt automatic control box
3. Uniform heating, with the aluminum alloy heating plate
4. Uniform water pressure system, with aluminum alloy material water hydraulic plate
Features & Usage
Simple, light weight, easy to operate, and can be used to reduce the cost of equipment purchase by using the cross beams of the vulcanizer. The operation method is the same as that of the conveyor belt vulcanizer.
Conveyor belt repair usage: This machine is mainly used for small area partial puncture, puncture and damage repair of various belts. The main material is aluminum alloy. Structure: This machine is powered by electric heating, pressure device and frame. The components, the machine is simple and reliable, it is an indispensable conveyor belt repair tool.
Structure of Cross beam spot repair vulcanizer press
3. Pull-cord bar
5. Heat insulation plate
6. Upper heating plate
7. Lower heating plate
8. Water hydraulic plate
1. Heating plate size: 350*350 mm;
2. Max. Repair size: 250*250 mm;
3. Working pressure: 0.5--1.0 MPa;
4. Rated power: 2.0 KW;
5. Heating up time< 30 minutes;
6. Timer adjust range: 0-99 minutes;
7. Temperature adjust range: 0-200 ℃;
8. Voltage: 220-660V, 50/60HZ, 3 Phases;
9. Repair belt width: 650 mm--2200 mm.
If belt width>1400 mm, please choose Cross Beam Spot Repair Vulcanizer.
Cross beam spot belt repair vulcanizer
Type of conveyor belt
Canvas, nylon and steel cord belt
Maximum size for belt repairing(mm)
Heating plate size(mm)
Vulcanizing temperature 145℃
220-660V, 50/60HZ, 3 Phases
Temperature difference of vulcanized heating plates
Warm up time(min)