Suzhou Arphu Industrial Co.,Ltd
Rubber Belt Vulcanizing Machine
Rubber Belt Vulcanizing MachineRubber belt vulcanizing machine can be widely used to joint / splice the rubber & steel cord belts, belt width from 650mm to 2800mm, standard splice length 830 or 1000mm, we can also customize your vulcanizing machine according to your actual belt needs. Our customer includes BHP, Lafarge cement, Fatima group, Innovators Conveyor belt Spa,Ngan Loi Company etc.

Rubber belt vulcanizing machine can be widely used to joint / splice the rubber & steel cord belts, belt width from 650mm to 2800mm, standard splice length 830 or 1000mm, we can also customize your vulcanizing machine according to your actual belt needs. Our customer includes BHP, Lafarge cement, Fatima group, Innovators Conveyor belt Spa,Ngan Loi Company etc.


Introduction:

Rubber belt vulcanizing machine is also called Conveyor belt vulcanizer, which is a kind of vulcanizing equipment through stacking the two ends of the conveyor belt with the raw rubber material body in between, via heating device in which the raw material body is melted and the both ends of the conveyor belt are bonded together by a pressurization and heat retention process.


The main raw materials of our rubber belt vulcanizing machines are made of high strength aluminum alloy. It adopts the chip type electric heating element to warm up, has advantage of stable operation, high thermal efficiency and uniform temperature. It is equipped with a light automatic electric control box. The pressure system is supplied with 0-2MPa uniform pressure. It is easy to operate and portable. It is prevalent to use conveyor belt vulcanizing equipment to make joints and repair of various conveyor belts in metallurgy, mining, cement, power plants, ports, building materials, chemical industries etc.


Conveyor belt vulcanizer structure

The vulcanizer is composed of the following parts.

1. Cross beam;

2. Clamps;

3. Iron plates for cushion;

4. Screw;

5. Nut;

6.Gasket;

7.High-pressure soft pipe;

8.Pressure-testing pump;

9. Heat-insulation plate;

10. Upper heating plates;

11. Secondary cable;

12. Electric control box;

13. Primary cable;

14. Down heating plates;

15. Hydraulic plates (please find Fig1 in detail)


image002


Configuration

The configuration options are described in the following sections.

Heating plates of the vulcanizers are available for rhombic, rectangular and modular type (two or more sets of heating plates together).

Modular conveyor belt vulcanizer can be applied to Belt width 3200 mm maximum.

Special design and production service is offered as per requirements of clients.

Natural cooling system or water cooling system

Feature of water cooling system: Rapid integral cooling fitted on both plates, belt vulcanizer could be dismantled within 5~10 minutes.

Manual pump or electrical pump.

Standard control cabinet or PLC control cabinet.

The conveyor belt vulcanizing press is widely used in the field of metallurgy, mining, power plants, ports, building materials, cement, coal mine, chemical industry, etc.

The machine can be customized to suit your actual splicing needs.


Technical parameter

1. Vulcanization pressure: 1.0-2.0 MPa;

2. Vulcanization temperature: 145°C;

3. Difference in surface temperature of vulcanized plate: ± 5°C;

4. Heating up time ( at normal temperature to 145°C )<30 minutes;

5. Voltage: 220V/ 380V/415V/440V/480V/550V/660V, 50/60HZ, 3 Phases;

6. Temperature adjustment range: 0 to 199°C;

7. Timer adjustment range: 0 to 99 minutes.


image003


Our Service

Pre-sale:

1. Assist the buyer in engineering planning and system requirements analysis, and develop a complete design plan

2. Work closely with the relevant authorities of the buyer, fully consider the models required for the buyer's project

3. Provide the professional technical consulting services

4. Provide inspection and reception at any time and various conveniences, select professional technical personnel, business personnel to carry out technical communication, timely offer product performance, features, program design drawings, and various parameters, and actively cooperate with the buyer to select a satisfactory product manufacturer.


Sale:

Understanding your construction sites, and guide you the specific installation and trial run, and training your operator for free.


After-sales service:

After-sales service staff will be return visit & question customers, and for the emergence of the problem, we will be in shortest time to give you a satisfactory solution. We shall make the investigation for the annual use of the product.


Related Products
Hot Tags: rubber belt vulcanizing machine, China, suppliers, manufacturers, factory, high quality, for sale