Conveyor Belt Vulcanizer, which is also called belt vulcanizer, vulcanizer machine and conveyor belt vulcanizer products, it’s used to splice and repair various kinds of conveyor belt, such as EP, Nylon, rubber and steel cord conveyor belt. It’s widely use in mining industry, chemical fertilizer, cement industry, steel mill, power plant, etc.
Conveyor belt vulcanizer is important for heavy-duty and long distance material handing, it’s the special equipment for conveyor belt repairing and jointing, the quality of the jointing directly effect the working life & working efficiency.
Conveyor Belt Vulcanizer is made by light weight aluminum alloy, it has the following advantages, such as light in weight, good effective of conveyor belt repairing and conveyor belt splicing. The strength can reach 85% of original conveyor belt. Conveyor belt vulcanizer has different configuration as per requirements of customers, such as natural cooling or water cooling system, manual pump or electric pump, as for control cabinet, we also have automatic and PLC touch screen control cabinet.
Structure and working principle:
The main parts of DLCBV conveyor belt vulcanizers are made of high-strength aluminum alloy.
The upper and lower heating plates, heat insulation plates, water hydraulic plates, cross beams, fastening bolts & nuts are used to manufacture the structure. The water hydraulic plate is pressurized by the water pump to ensure the vulcanization process.
Vulcanization pressure (0-2Mpa) vulcanization temperature (ambient temperature 0 degrees Celsius - 200 degrees Celsius) is carried out through the electric control box, automatic or manual control, the vulcanization time is arbitrarily set, and the alarm signal is sent when the predetermined time is reached. The belt vulcanization joint is completed. Check the insulation resistance of the heating plate before use. If it is too low, it should be energized and dried before use.
1. Vulcanization pressure: 1.0-2.0 MPa;
2. Vulcanization temperature: 145°C;
3. Difference in surface temperature of vulcanized plate: ± 5°C;
4. Heating up time ( at normal temperature to 145°C )<30 minutes;
5. Voltage: 220V/ 380V/415V/440V/480V/550V/660V, 50/60HZ, 3 Phases;
6. Temperature adjustment range: 0 to 199°C;
7. Timer adjustment range: 0 to 99 minutes.