The DLBRV-II conveyor belt repair vulcanizing machine is a kind of vulcanizing equipment for on-site conveyor belt repairs with the bed edge damage.
During the operation of the belt conveyor, due to the deviation or the quality of the conveyor itself, the belt is damaged on both sides, which affects the normal use. TheDLBRV-II type electric heating conveyor belt repair vulcanizing machine can be used in a short time after the shutdown (usually 3 hours). In the case where the roller is not removed, effective vulcanization repair is performed on the edge damage. It is a comprehensive and widely used repairing equipment with the same performance and operation method as the conveyor belt vulcanizing machine.
1. Vulcanization temperature: 145℃
2. Vulcanization pressure: 0.8 Mpa
3. Heating plate size: 320*700 mm
4. Rated power: 3.6 KW
Belt edge repair vulcanizer
Type of conveyor belt
Canvas, nylon and steel cord belt
Maximum size for belt repairing(mm)
Heating plate size(mm)
Vulcanizing temperature 145℃
220-660V, 50/60HZ, 3 Phases
Temperature difference of vulcanized heating plates
Warm up time(min)
The main parts of repaivulcanizer is made of aluminum alloy, which results in smaller volume, lighter weight, and easier carrying.
The electrothermal components are of multilayer structure, connected by three-phase electric circuit at voltage 380V (or 660V). It works stably and reliably on small current.
The heating plate shell is made of aluminum alloy, with low thermal inertia and directivity, can make better surface heating temperature uniformity.
During the working time of the heating plate, from warming to vulcanizing, the time and temperature are both controlled by the control box. It ensures low energy consumption, high efficiency, convenient operation, reliable work, and good vulcanization quality.
The type of the pressure device is hydraulic pressure plate, its structure is simple and the maintenance is convenient. It can make large and even pressure during vulcanization.