This belt repair machine is used to repair edge broken of conveyor belt.
Its main material is high strength aluminum alloy, it includes three main components: electric heating plate, pressure device and frame. It is simple in structure, convenient and reliable in operation, and has a water cooling device.
DLBRV-II Conveyor belt repair machine suits for EP, Nylon, Canvas and steel cord conveyor belt’s edge repairing. after the conveyor stopped within a short time(usually it is 3 hours) and without dismantling the rollers, DLBRV-II Conveyor belt repair machine can be used to vulcanize and repair the damaged edge quickly.
The operation method of DLBRV-II belt repair machine is same as the Conveyor belt vulcanizer.
1. Heating plate size: 320*700 mm
2. Max. Repair size: 220*600 mm
3. Working pressure: 0.5--1.0 MPa
4. Rated power: 3.6 KW
5. Heating up time< 30 minutes
6. Timer adjust range: 0-99 minutes
7. Temperature adjust range: 0-200 ℃
8. Voltage: 220-660V, 50/60HZ, 3 Phases
Belt edge repair vulcanizer
Type of conveyor belt
Canvas, nylon and steel cord belt
Maximum size for belt repairing(mm)
Heating plate size(mm)
Vulcanizing temperature 145℃
220-660V, 50/60HZ, 3 Phases
Temperature difference of vulcanized heating plates
Warm up time(min)