Suzhou Arphu Industrial Co.,Ltd
Home > PROJECT > Content
Maintenance and maintenance of belt vulcanizer
Nov 29, 2018

1. The upper and lower electric heating and control boxes are connected by various electrical components and various electrical instruments. Therefore, during handling or use, be sure to take it lightly and gently, to prevent strong vibration and excessive rubbing.

2. Before using the vulcanizer of the belt vulcanizer, be sure to check whether the electric heating elements in the heating plate are damp and affect the insulation. Otherwise, it should be dried. Whether the fastening screws and nuts of the Ali device are loose and leaking water, otherwise it is necessary. Solid; whether the switches and instruments of the electric control box are flexible and reliable.

3. When vulcanizing and bonding in the open field, pay attention to wind and rain. After use, it should be padded with square wood, etc., and it should be covered with a rainproof cloth to prevent damage from moisture and water.

4. When the vulcanizer of the belt vulcanizer is not in use, it should be placed in the air circulation, the relative humidity is not more than 85%, and it should not be in the warehouse where the rain and snow are infiltrated; when it is placed, it should be padded with the square wood, and it is strictly prohibited to be placed directly on the ground.